Trustic

It is into Home Improvement business that sells Epoxy Resin, Barn Door Hardware, Metal Legs, Milk Paint and Wallpapers etc.
#J2C New Horizon Mall, (Near Cross Iron Mills), 260300 Writing Creek Crescent T4A 0X8 Balzac, AB, Canada
Phone: 1-780-604-5390

Slow Cure Casting Epoxy Resin (for thick pours)

  • $74.00
  • Save $0.00


FULL SATISFACTION GUARANTEED!!

Slow Cure Casting Epoxy Resin: 
This resin has longer curing time and therefore is suitable for project where thick pours are required such as River Tables etc. You can do up to 2" pour at a time and if you need more thickness, give a gap of at least 4 hours and do another pour on top of the previous one.

Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.
 

It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.

 



Features:

Crystal clear, high gloss and transparent, yellow resistant
Automatic leveling and anti-foaming
Low set-to-touch and cure time
Goes well with pigments of all colors
Non toxic, low odor and low VOC
High hardness after drying
Glossy like mirror

Technical Specifications:
Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)
Pot Life: 45 to 60 min
Coverage: 1" thickness of 1 sqft area requires about 2.5 L (Part A + B)
Set to touch time: 36 to 48 hrs
Curing Time: 72 to 96 hrs (varies based on ambient temp / humidity / thickness)
Surface ready to use time: 96 hrs 

Directions:
Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.

Step 2: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.

Step 3: If multiple flood coats are to be applied, make sure that each flood coat is less than 2" thick and maintain a gap of 4 hours between each flood coat.

Step 5: Pop air bubbles using a heat gun or plumber torch.

Step 6: Leave the surface for epoxy curing


We Also Recommend


Customer Reviews
5 Based on 5 Reviews
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
DM
03/11/2020
Doreen M.
Canada Canada
I recommend this product
Slow cure resin

This resin is amazing. I have tried 5 other brands and none of them compare to the crystal clear clarity of this resin. I will purchase all my resin here from now on.

A
03/08/2020
Anonymous
Canada Canada
I recommend this product
Great product, bought locally

I found the Trustic resin to be a high quality item and I was also pleased that I could buy it locally and support a small business. I will definitely buy there again.

MK
01/21/2020
Mike K.
Canada Canada
I recommend this product
Epoxy and pigments

The epoxy and pigment performed exactly as stated, very happy with the results.

D
12/11/2019
Dan
Canada Canada
I recommend this product
Great service and product

I used the slow cast epoxy and I love it. I found I help my metallic pigments better than the higher priced name brand I tried previous and the shipping was fast and cheap! Would strongly recommend this company and product!

Dan verified customer review of Slow Cure Casting Epoxy Resin (for thick pours)
12/12/2019
Trustic

Thanks a lot Dan :)

A
09/12/2019
Anonymous
Canada Canada
I recommend this product
Table top.

Product was easy to measure & mix. Pours well. Easy to use.