Surface Coating Epoxy Resin
FULL SATISFACTION GUARANTEED!!
Surface Coating Epoxy Resin:
Suitable for coating of large surface area such as Countertops, Indoor Flooring, Tabletops etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.
Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.
High gloss and yellow resistant
Automatic leveling and anti-foaming
Low set-to-touch and cure time
Goes well with pigments of all colors
Non toxic, low odor and low VOC
High hardness after drying
Glossy like mirror
Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)
Pot Life: 15-30 min
Coverage: 1/8" thickness requires about 150 ml (Part A + B)
Set to touch time: 12-14 hrs
Curing Time: 36-48 hrs (varies based on ambient temp / humidity / thickness)
Surface ready to use time: 72 hrs
Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.
Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.
Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.
Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2" thick and maintain a gap of 4 hours between each flood coat.
Step 5: Pop air bubbles using a heat gun or plumber torch.
Step 6: Leave the surface for epoxy curing
We Also Recommend
First time user
Surprised me how easy it is to use epoxies. You watch all the youtube videos thinking you know how to use and then when it comes to using epoxy for the first time you worry constantly did I get the mixture right. This product is as easy to use as reading the instructions. Thanks Guys will definitely be purchasing more product from you. Thanks Kerry
Using for practice projects
It was good for coasters but since it can heat up quite a bit, using this on dried flowers is not ideal. As I'm trying out different techniques, this is good for practicing as it is cost efficient.
Great epoxy for my projects
It was really great and I was so happy with the results. It dried faster than I expected.I used it for casting.
Easy to use
I recently built an poxy river table. I used trustics slow cure epoxy . It was very easy to use and I had more than enough time after mixing the resin and hardener, theres no need to rush the process.I colored it using some blue powdered mica that I also purchased it gave the river a very nice sparkle and color just like I wanted. I finished it off with trusting surface coating epoxy again the product worked flawlessly. Both epoxy were easy to use. It was also very easy to run the torch over the surface to remove any bubbles that appeared. All said I will be purchasing more products in the future.
Used this product on a resin and wood river table. Easy to apply and levels out nicely. Apply very thin seal coat first if using on wood to avoid any bubbles. Glass like finish.