Trustic

It is into Home Improvement business that sells Epoxy Resin, Barn Door Hardware, Metal Legs, Milk Paint and Wallpapers etc.
#J2C New Horizon Mall, (Near Cross Iron Mills), 260300 Writing Creek Crescent T4A 0X8 Balzac, AB, Canada
Phone: 1-780-604-5390

General Casting Epoxy Resin

  • $65.00
  • Save $0.00


FULL SATISFACTION GUARANTEED!!

Crystal Clear Casting Epoxy Resin:
Suitable for most crafts and hobby projects such as Jewelry Casting, River Tables, Canvas Painting and Coins casting purposes etc. It comes in two parts - Resin & Hardener. These two parts MUST be mixed in precise ratio and mixed well to get best results.

Note: Make sure to store the epoxy resin jugs away from direct sunlight at room temperature around 20 to 22 deg C. Keep your project at room temperature so that the project surface is not too cold before pouring epoxy on it.

 

 

Features:

Crystal clear, high gloss and transparent, yellow resistant
Automatic leveling and anti-foaming
Low set-to-touch and cure time
Goes well with pigments of all colors
Non toxic, low odor and low VOC
High hardness after drying
Glossy like mirror

Technical Specifications:
Ratio A to B: 2.7 to 1 (by volume) OR 3 to 1 (by weight)
Pot Life: 30 min
Coverage: 1" thickness for 1 sq ft area needs about 2.5 L of epoxy (Part A + B)
Set to touch time: 12-14 hrs
Curing Time: 20 - 24 hrs (varies based on ambient temp / humidity / thickness)
Surface ready to use time: 72 hrs

Directions:
Step 1: Wear safety glasses and gloves. Measure 2.7 parts of part A and 1 part of part B by volume (OR 3 to 1 by weight). Mix thoroughly.

Step 2: On porous objects such as made out of wood, paint a seal coat of same epoxy mixture of A & B first to seal any pores to prevent air bubbles from forming.

Step 3: Make sure the surface area is horizontal to the ground and leveled. Pour the epoxy on the surface all the way through the area. This epoxy self levels itself so no need to move it around with any tools. Let the epoxy fall over the edges and coat the vertical edges. The liquid epoxy that falls over the edges will form bumps and there is no need to worry about that. These can be sanded off once the epoxy is dried and cured.

Step 4: If multiple flood coats are to be applied, make sure that each flood coat is less than 1/2" thick and maintain a gap of 4 hours between each flood coat.

Step 5: Pop air bubbles using a heat gun or plumber torch.

Step 6: Leave the surface for epoxy curing


We Also Recommend


Customer Reviews
5.0 Based on 23 Reviews
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JH
05/20/2021
jeff H.
Canada Canada
I recommend this product
2 orders of 3 gallons epoxy

Great product so far. One container of hardener had leaked in the shipping box. Bit of a mess. Jeff.

RC
05/18/2021
Reava C.
Canada Canada
I recommend this product
Excellent Product, highly recommend.

I really love the casting epoxy. It is crystal clear, no bubbles, and easy to work with. I use this to cast dried florals.

Trustic General Casting Epoxy Resin Review
KS
05/02/2021
Karen S.
Canada Canada
I recommend this product
Great for experimenting.

Easy to work with and long working time and can be cooled down with fans when the exothermic reaction happens.

Trustic General Casting Epoxy Resin Review
LB
03/18/2021
Larry B.
Canada Canada
I recommend this product
General Casting Epoxy

Have used on several projects the last one being a 2' diameter 3D inlayed table, also used their cast iron legs, turned out very well.

Trustic General Casting Epoxy Resin ReviewTrustic General Casting Epoxy Resin ReviewTrustic General Casting Epoxy Resin Review
DP
01/11/2021
Dayna P.
Canada Canada
I recommend this product
Love this product

Love this product any company. I order from BC and it arrives within 2-3 days. Fast shipping, easy to work with. Will order again and again.

Trustic General Casting Epoxy Resin Review